- Mark the register constants more explicitly.

- Moved the Sensitivity constants to a dedicated section.
- SpiFrequency is set to 2Mz ( ADXL345 supports up to 5Mz )
- Removed the TurnOnOnStart options, we start measuring on instantiation.
- Minor typo and example.go fix.

adxl345/adxl345.go

@@ -9,14 +9,12 @@ import (
 
 type Sensitivity byte
 
+// The following constants are register used by the ADXL345
+// Check the table 19 of the datasheet for more details.
+// https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf
 const (
 	DeviceID = 0x00 // Device ID, expected to be 0xE5 when using ADXL345
 
-	S2G  Sensitivity = 0x00 // Sensitivity at 2g
-	S4G  Sensitivity = 0x01 // Sensitivity at 4g
-	S8G  Sensitivity = 0x02 // Sensitivity at 8g
-	S16G Sensitivity = 0x03 // Sensitivity at 16g
-
 	ThreshTap        = 0x1D // Tap threshold
 	OfsX             = 0x1E // X-axis offset
 	OfsY             = 0x1F // Y-axis offset
@@ -57,21 +55,29 @@ const (
 
 )
 
-// DefaultSpiFrequency is the default SPI frequency used to communicate with the device.
+// Sensitivity constants represents the sensitivity of the ADXL345.
+// The ADXL345 supports 4 sensitivity settings, ±2g, ±4g, ±8g, and ±16g, with the default being ±2g.
+// Sensitivity is an option that can be set at initialization in Opts.
+// You can set the sensitivity of the ADXL345 with the DataFormat register.
+const (
+	S2G  Sensitivity = 0x00 // Sensitivity at 2g
+	S4G  Sensitivity = 0x01 // Sensitivity at 4g
+	S8G  Sensitivity = 0x02 // Sensitivity at 8g
+	S16G Sensitivity = 0x03 // Sensitivity at 16g
+)
+
 var (
-	SpiFrequency = physic.KiloHertz * 50
+	SpiFrequency = physic.MegaHertz * 2
 	SpiMode      = spi.Mode3 // Defines the base clock signal, along with the polarity and phase of the data signal.
 	SpiBits      = 8
 )
 
 var DefaultOpts = Opts{
-	TurnOnOnStart:    true,
 	ExpectedDeviceID: 0xE5,
 	Sensitivity:      S2G,
 }
 
 type Opts struct {
-	TurnOnOnStart    bool        // Turn on the device in measurement mode on start.
 	ExpectedDeviceID byte        // Expected device ID used to verify that the device is an ADXL345.
 	Sensitivity      Sensitivity // Sensitivity of the device (2G, 4G, 8G, 16G)
 }
@@ -81,6 +87,8 @@ type Opts struct {
 type Dev struct {
 	name string
 	s    spi.Conn
+	// The sensitivity of the device (2G, 4G, 8G, 16G)
+	// Set to 2G by default, can be changed in the Opts at initialization.
 	sensitivity Sensitivity
 }
 
@@ -103,12 +111,10 @@ func New(p spi.Port, o *Opts) (*Dev, error) {
 		name: "ADXL345",
 		s:    c,
 	}
-	if o.TurnOnOnStart {
 	err = d.TurnOn()
 	if err != nil {
 		return nil, err
 	}
-	}
 	if o.Sensitivity != S2G { // default
 		err = d.setSensitivity(o.Sensitivity)
 		if err != nil {
@@ -173,7 +179,9 @@ func (d *Dev) ReadAndCombine(reg1, reg2 byte) int16 {
 
 // Read reads a 16-bit value from the specified register address.
 func (d *Dev) Read(regAddress byte) (int16, error) {
-	rx, err := d.ReadRaw(regAddress)
+	tx := []byte{regAddress | 0x80, 0x00}
+	rx := make([]byte, len(tx))
+	err := d.s.Tx(tx, rx)
 	if err != nil {
 		return 0, err
 	}

adxl345/example/example.go

@@ -26,8 +26,7 @@ func Example() {
 
 	defer p.Close()
 
-	o := adxl345.DefaultOpts
-	d, err := adxl345.New(p, &o)
+	d, err := adxl345.New(p, &adxl345.DefaultOpts)
 	if err != nil {
 		panic(err)
 	}