Initial Add

nxp74hc595/74hc595.go

@@ -0,0 +1,190 @@
+// Copyright 2025 The Periph Authors. All rights reserved.
+// Use of this source code is governed under the Apache License, Version 2.0
+// that can be found in the LICENSE file.
+
+// The 74HC595 is a serial shift register. It converts a serial stream to a
+// parallel output. For example, you can use it as an SPI => Parallel
+// converter.
+//
+// # Datasheet
+//
+// https://www.nexperia.com/product/74HC595D
+//
+// There's a nice tutorial on the device here:
+//
+// https://docs.arduino.cc/tutorials/communication/guide-to-shift-out/
+package nxp74hc595
+
+import (
+	"errors"
+	"fmt"
+	"sync"
+	"time"
+
+	"periph.io/x/conn/v3/gpio"
+	"periph.io/x/conn/v3/pin"
+	"periph.io/x/conn/v3/spi"
+)
+
+const (
+	devMask = 0xff
+	devName = "74HC595"
+	numPins = 8
+)
+
+var (
+	ErrNotImplemented = errors.New("nxp74hc595: not implemented")
+)
+
+// Dev represents a 74hc595 device.
+type Dev struct {
+	Pins []gpio.PinOut
+
+	mu    sync.Mutex
+	conn  spi.Conn
+	value gpio.GPIOValue
+}
+
+// Group implements gpio.Group and provides a way to write to multiple GPO pins
+// in a single transaction.
+type Group struct {
+	dev  *Dev
+	pins []Pin
+}
+
+// New accepts an spi.Conn and returns a new HC74595 device.
+func New(conn spi.Conn) (*Dev, error) {
+	// setting value to an invalid initial state forces the first write to
+	// happen, even if it's 0.
+	dev := Dev{conn: conn, value: gpio.GPIOValue(1 << 9), Pins: make([]gpio.PinOut, numPins)}
+	for ix := range numPins {
+		dev.Pins[ix] = &Pin{number: ix, name: fmt.Sprintf("%s_GPO%d", devName, ix), dev: &dev}
+	}
+	return &dev, nil
+}
+
+// write does the low-level write to the device.
+func (dev *Dev) write(value, mask gpio.GPIOValue) error {
+
+	dev.mu.Lock()
+	defer dev.mu.Unlock()
+	newValue := (dev.value & (devMask ^ mask)) | (value & mask)
+	if dev.value == newValue {
+		return nil
+	}
+	var err error
+	var w = []byte{byte(newValue)}
+	err = dev.conn.Tx(w, nil)
+	if err == nil {
+		dev.value = newValue
+	}
+	return err
+}
+
+// Group returns a subset of pins on the device as a gpio.Group. A Group
+// allows you to write to multiple pins in a single transaction.
+func (dev *Dev) Group(pins ...int) (gpio.Group, error) {
+	gr := Group{dev: dev, pins: make([]Pin, len(pins))}
+	for ix, pinNumber := range pins {
+		if p, ok := dev.Pins[pinNumber].(*Pin); ok {
+			gr.pins[ix] = *p
+		}
+	}
+	return &gr, nil
+}
+
+// Halt disables the device
+func (dev *Dev) Halt() (err error) {
+	dev.mu.Lock()
+	defer dev.mu.Unlock()
+	dev.Pins = make([]gpio.PinOut, 0)
+	dev.conn = nil
+	return
+}
+
+func (dev *Dev) String() string {
+	return devName
+}
+
+// Return the set of GPO Pins that are associated with this group.
+func (gr *Group) Pins() []pin.Pin {
+	result := make([]pin.Pin, len(gr.pins))
+	for ix, p := range gr.pins {
+		result[ix] = &p
+	}
+	return result
+
+}
+
+// Given an offset of a pin into the group, return that pin.
+func (gr *Group) ByOffset(offset int) pin.Pin {
+	return &gr.pins[offset]
+}
+
+// Given a name of a pin in the group, return that pin.
+func (gr *Group) ByName(name string) pin.Pin {
+	for _, p := range gr.pins {
+		if p.name == name {
+			return &p
+		}
+	}
+	return nil
+}
+
+// Given the pin number of a pin within the group, return that pin.
+func (gr *Group) ByNumber(number int) pin.Pin {
+	for _, p := range gr.pins {
+		if p.number == number {
+			return &p
+		}
+	}
+	return nil
+}
+
+// Out writes the value to the device. Only pins identified by mask are
+// modified.
+func (gr *Group) Out(value, mask gpio.GPIOValue) error {
+	if mask == 0 {
+		mask = gpio.GPIOValue(1<<len(gr.pins)) - 1
+	}
+	wrMask := gpio.GPIOValue(0)
+	wrValue := gpio.GPIOValue(0)
+	for ix := range len(gr.pins) {
+		currentBit := gpio.GPIOValue(1 << ix)
+		if (mask & currentBit) == currentBit {
+			wrMask |= gpio.GPIOValue(1 << gr.pins[ix].number)
+		}
+		if (value & currentBit) == currentBit {
+			wrValue |= gpio.GPIOValue(1 << gr.pins[ix].number)
+		}
+	}
+	return gr.dev.write(wrValue, wrMask)
+}
+
+// Read is not available for this device.
+func (gr *Group) Read(mask gpio.GPIOValue) (gpio.GPIOValue, error) {
+	return 0, ErrNotImplemented
+}
+
+// WaitForEdge is not available for this device.
+func (gr *Group) WaitForEdge(timeout time.Duration) (int, gpio.Edge, error) {
+	return 0, gpio.NoEdge, ErrNotImplemented
+}
+
+// Halt frees the group's resources and prevents it from being used again.
+func (gr *Group) Halt() error {
+	gr.pins = make([]Pin, 0)
+	return nil
+}
+
+func (gr *Group) String() string {
+	s := gr.dev.String() + "[ "
+	for ix := range len(gr.pins) {
+		s += fmt.Sprintf("%d ", gr.pins[ix].number)
+	}
+	s += "]"
+	return s
+}
+
+var _ gpio.PinOut = &Pin{}
+var _ gpio.Group = &Group{}

nxp74hc595/74hc595_test.go

@@ -0,0 +1,54 @@
+// Copyright 2025 The Periph Authors. All rights reserved.
+// Use of this source code is governed under the Apache License, Version 2.0
+// that can be found in the LICENSE file.
+
+package nxp74hc595
+
+import (
+	"log"
+	"testing"
+
+	"periph.io/x/conn/v3/conntest"
+	"periph.io/x/conn/v3/gpio"
+	"periph.io/x/conn/v3/physic"
+	"periph.io/x/conn/v3/spi"
+	"periph.io/x/conn/v3/spi/spitest"
+)
+
+func TestBasic(t *testing.T) {
+	pb := &spitest.Record{Ops: make([]conntest.IO, 0)}
+	defer pb.Close()
+	conn, err := pb.Connect(physic.MegaHertz, spi.Mode1, 8)
+	if err != nil {
+		log.Fatal(err)
+	}
+
+	dev, err := New(conn)
+	if err != nil {
+		log.Fatal(err)
+	}
+
+	gr, _ := dev.Group(6, 5, 4, 3)
+	for i := range 16 {
+		gr.Out(gpio.GPIOValue(i), 0)
+	}
+	singlePin := dev.Pins[7]
+	for i := range 20 {
+		err = singlePin.Out(gpio.Level(i%2 == 0))
+		if err != nil {
+			t.Error(err)
+		}
+		err = dev.Pins[0].Out(i%2 != 0)
+		if err != nil {
+			t.Error(err)
+		}
+	}
+	err = dev.Pins[0].Out(gpio.Low)
+	if err != nil {
+		t.Error(err)
+	}
+	err = singlePin.Out(gpio.High)
+	if err != nil {
+		t.Error(err)
+	}
+}

nxp74hc595/example_test.go

@@ -0,0 +1,41 @@
+// Copyright 2025 The Periph Authors. All rights reserved.
+// Use of this source code is governed under the Apache License, Version 2.0
+// that can be found in the LICENSE file.
+
+package nxp74hc595
+
+import (
+	"log"
+
+	"periph.io/x/conn/v3/gpio"
+	"periph.io/x/conn/v3/physic"
+	"periph.io/x/conn/v3/spi"
+	"periph.io/x/conn/v3/spi/spireg"
+	"periph.io/x/host/v3"
+)
+
+func Example() {
+	if _, err := host.Init(); err != nil {
+		log.Fatal(err)
+	}
+    // Open the SPI Bus
+	pc, err := spireg.Open("")
+	if err != nil {
+		log.Fatal(err)
+	}
+	defer pc.Close()
+	conn, err := pc.Connect(physic.MegaHertz, spi.Mode1, 8)
+	if err != nil {
+		log.Fatal(err)
+	}
+    // Create a new 74HC595 device conn that bus.
+	dev, err := New(conn)
+	if err != nil {
+		log.Fatal(err)
+	}
+	// Get a GPIO group, and write values to it.
+	gr, _ := dev.Group(0, 1, 2, 3, 4, 5, 6, 7, 8)
+	for i := range 256 {
+		gr.Out(gpio.GPIOValue(i), 0)
+	}
+}

nxp74hc595/pin.go

@@ -0,0 +1,55 @@
+// Copyright 2025 The Periph Authors. All rights reserved.
+// Use of this source code is governed under the Apache License, Version 2.0
+// that can be found in the LICENSE file.
+
+package nxp74hc595
+
+import (
+	"periph.io/x/conn/v3/gpio"
+	"periph.io/x/conn/v3/physic"
+)
+
+type Pin struct {
+	dev    *Dev
+	name   string
+	number int
+}
+
+// Halt implements conn.Resource.
+func (pin *Pin) Halt() error {
+	return nil
+}
+
+// Name returns the name of the GPIO pin.
+func (pin *Pin) Name() string {
+	return pin.name
+}
+
+// Number returns the number of the GPIO pin.
+func (pin *Pin) Number() int {
+	return pin.number
+}
+
+// Deprecated: returns "Out"
+func (pin *Pin) Function() string {
+	return "Out"
+}
+
+// Write the specified gpio.Level to the pin.
+func (pin *Pin) Out(l gpio.Level) error {
+	mask := gpio.GPIOValue(1 << pin.number)
+	v := gpio.GPIOValue(0)
+	if l {
+		v = mask
+	}
+	return pin.dev.write(v, mask)
+}
+
+// Not implemented.
+func (pin *Pin) PWM(duty gpio.Duty, f physic.Frequency) error {
+	return ErrNotImplemented
+}
+
+func (pin *Pin) String() string {
+	return pin.name
+}