saving changes

README.md

@@ -1,6 +1,7 @@
 # MicroPython ESP8266/ESP32
 
 ## Installation
+
 You will want to make sure you are installing the latest version of [Micropython](hhttps://micropython.org/). Download the appropriate [.bin for your chip](https://micropython.org/download) and flash it to your board using the [esptool](https://github.com/espressif/esptool). You will most likely need the UART driver for this operation. In my case my board uses the [Silicon Labs CP210x driver](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers).
 
 ### Create a new virtualenv
@@ -11,7 +12,9 @@ Virtualenv's separate third party packages from your system Python installation.
 python3 -m venv env
 source env/bin/activate
 ```
+
 Then pip install the requirements listed in the provided file.
+
 ```
 pip install -r requirements.txt
 ```
@@ -25,12 +28,14 @@ I am using a Mac and after installing the CP210x driver and plugging in the boar
 crw-rw-rw-  1 root  wheel   18,   5 Feb  2 11:03 /dev/cu.SLAB_USBtoUART
 crw-rw-rw-  1 root  wheel   18,   4 Feb  2 11:03 /dev/tty.SLAB_USBtoUART
 ```
+
 The file type position lists this as a 'c' or character device. The `cu.SLAB_USBtoUART` and `tty.SLAB_USBtoUART`
 are the same device, but tty is supposed to be used for devices calling into Unix/Linux where
 cu is a "Call-Up" device meant for calling other devices (e.g. modems). Since we are calling from the Mac to
 the dev board we will be using the `/dev/cu.SLAB_USBtoUART` character file for connecting to the board.
 
 ### Flashing your board
+
 ESP32
 
 ```
@@ -42,6 +47,7 @@ esptool.py --chip esp32 --port /dev/cu.SLAB_USBtoUART --baud 115200 write_flash
 ```
 
 ESP8266
+
 ```
 esptool.py -p /dev/cu.SLAB_USBtoUART erase_flash
 ```
@@ -114,13 +120,13 @@ Once again you may be a little confused by the official documentation for settin
 #MQTT Light Sensor
 sensor office_light:
   - platform: mqtt
-    name: "Office Light"
-    unit_of_measurement: "No."
+    name: 'Office Light'
+    unit_of_measurement: 'No.'
     # Note your esp8266 will have a different MAC id. You can find the sensor's full topic path in the logs of the MQTT add-on
-    state_topic: "light/esp8266_aa00f800"
+    state_topic: 'light/esp8266_aa00f800'
     # Our json is a simple single value extracted with this jinja2 template
     # More templating info can be found here https://www.home-assistant.io/docs/configuration/templating/#processing-incoming-data
-    value_template: "{{value_json.payload}}"
+    value_template: '{{value_json.payload}}'
     # Material design icons https://cdn.materialdesignicons.com/2.3.54/
     icon: mdi:lightbulb-on-outline
 ```
@@ -142,3 +148,7 @@ Let's assume you haven't built the ESP8266 sensor. You can still test your servi
 - https://learn.adafruit.com/micropython-hardware-i2c-devices
 - https://learn.adafruit.com/micropython-hardware-spi-devices
 - https://learn.adafruit.com/building-and-running-micropython-on-the-esp8266/overview
+
+### Libs
+
+- https://github.com/jczic/MicroWebSrv

etc/profile

@@ -0,0 +1,56 @@
+export AMPY_PORT=/dev/cu.SLAB_USBtoUART
+export BAUD_RATE=115200
+
+ARG=$1
+
+if [ "$ARG" = '--kit' ] || [ "$ARG" = '-k' ]; then
+  echo "Using ESP-WOVER-kit_v4.1"
+#   export AMPY_PORT=/dev/cu.usbserial-143101
+  export AMPY_PORT=/dev/cu.usbserial-14401
+fi
+
+function _set_kit_usbserial (){
+
+}
+
+
+function repl_connect (){
+	echo "Connecting to $AMPY_PORT"
+	echo "Use Ctrl+a then k to kill the session"
+	sleep 2;
+	screen $AMPY_PORT $BAUD_RATE
+}
+
+function upy (){
+	_command=${1}
+	shift
+# 	echo "command $_command params $@"
+	ampy -p $AMPY_PORT -b $BAUD_RATE ${_command} $@
+}
+
+# m0 maps to conng
+alias mp="mpremote m0"
+
+function esp32-docs () {
+	echo "\nDocs: https://docs.micropython.org/en/latest/esp32/quickref.html\n"
+	open 'https://docs.micropython.org/en/latest/esp32/quickref.html'
+}
+
+function upy-git () {
+
+	echo '\n Upy Git: https://github.com/micropython/micropython\n'
+	open 'https://github.com/micropython/micropython'
+}
+
+# Cool things you can do with mpremote
+function mpremote_usage () {
+	echo "\n#### USAGE ####\n"
+	echo "\nDocs: https://docs.micropython.org/en/latest/reference/mpremote.html\n"
+	echo 'Ideas:'
+	echo "- The config file for mprempte is in ~/.config/mpremote/config.py"
+	echo '- You can user `mp mount . exec "import foo"` to mount a foo module from curdir and programmatically execute it.'
+	echo '- Rapidly iterate compiling C into .mpy files then mounting that file on your board! See: https://www.youtube.com/watch?v=EVJA01W9ArI'
+	echo "\n#### USAGE END ####\n"
+}
+
+

scripts/profile

@@ -1,29 +0,0 @@
-export AMPY_PORT=/dev/cu.SLAB_USBtoUART
-export BAUD_RATE=115200
-
-ARG=$1
-
-if [ "$ARG" = '--kit' ] || [ "$ARG" = '-k' ]; then
-  echo "Using ESP-WOVER-kit_v4.1"
-#   export AMPY_PORT=/dev/cu.usbserial-143101
-  export AMPY_PORT=/dev/cu.usbserial-14401
-fi
-
-function _set_kit_usbserial (){
-
-}
-
-
-function repl_connect (){
-	echo "Connecting to $AMPY_PORT"
-	echo "Use Ctrl+a then k to kill the session"
-	sleep 2;
-	screen $AMPY_PORT $BAUD_RATE
-}
-
-function upy (){
-	_command=${1}
-	shift
-# 	echo "command $_command params $@"
-	ampy -p $AMPY_PORT -b $BAUD_RATE ${_command} $@
-}

tmp/test.json

@@ -0,0 +1,4 @@
+{
+  "neo_pin": 48,
+  "neo_number": 1
+}