You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

4.3 KiB

Raw Blame History

MicroPython ESP8266

Installation

You will want to make sure you are installing the latest version of Micropython. Download the appropriate .bin for your chip and flash it to your board using the esptool. You will most likely need the UART driver

pip install esptool

Flashing your board

First be sure to erase the flash:

esptool.py -p /dev/tty.SLAB_USBtoUART erase_flash

Then you will need to write the flash to your board. Be sure to connect with an appropriate baud rate:

esptool.py --port /dev/tty.SLAB_USBtoUART --baud 115200 write_flash --flash_size=detect 0 esp8266-20170108-v1.8.7.bin

Connecting to your board

If you are using a mac just leverage the screen program:

screen /dev/tty.SLAB_USBtoUART 115200

This should connect you to the boards REPL

Connecting to the network

PLACEHOLDER

Code files

Micropython provides a "Virtual" filesystem for you code and collateral (config files etc.).

There are two files that you should take note of boot.py and main.py. The boot.py file will be executed immediately as the interpreter is brought online. It is here that we can place code to connect to a network for example. The main.py file should contain the entry point for your Micropython code. This will typically follow the same "Initialize" and enter "While Loop" pattern of code that you see if Arduinos

Extras

An excellent source for additional "Standard Library" like code can be found at Micropython-lib.

For shipping up code to you board I highly suggest using either the Pycharm Pluggin or the ampy modul e tool from adafruit.

ampy --help

ampy -p /dev/tty.SLAB_USBtoUART -b 115200 ls

MQTT on Hassio

Assuming you have Hassio installed (on a raspberry Pi3 for example). You will find the official MQTT broker documentation lacking in that small amount of detail that will get you up and running. This section is supposed to help take you that final mile.

The MQTT Broker

Let's start assuming you are going to use the downloadable MQTT broker from the add-on store. You will also want to have the configurator package installed too. Open up the configurator web-gui and find your /config/configuration.yaml file and addc the following entry at the bottom of the file:

#MQTT Setup
mqtt:
 broker: 0.0.0.0
 port: 1883

This will ensure that your broker properly configured. Now just make sure that you set the Start on boot to True in the addon details and restart your home-assistant.

An MQTT Sensor

Once again you may be a little confused by the official documentation for setting up an MQTT sensor. Assuming you are using the sample photoresitor light sensor that is included in this repo. Go back to your /config/configuration.yaml and this entry:

#MQTT Light Sensor
sensor office_light:
  - platform: mqtt
    name: "Office Light"
    unit_of_measurement: "No."
    # Note your esp8266 will have a different MAC id. You can find the sensor's full topic path in the logs of the MQTT add-on
    state_topic: "light/esp8266_aa00f800"
    # Our json is a simple single value extracted with this jinja2 template
    # More templating info can be found here https://www.home-assistant.io/docs/configuration/templating/#processing-incoming-data
    value_template: "{{value_json.payload}}"
    # Material design icons https://cdn.materialdesignicons.com/2.3.54/
    icon: mdi:lightbulb-on-outline

This should create an MQTT sensor that you will find on your Overview homepage after you restart the Hassio server.

Testing your new topic

Let's assume you haven't built the ESP8266 sensor. You can still test your service through the Hassio Developer tools at http://hassio:8123/dev-service. Select mqtt.publish as just craft a simple payload. Once you call the service you should see the result in the Sensor's component on your Overview

4.3 KiB Raw Blame History